Luchtdruk zandstraalpistool voor het verwijderen van verf, roest, vlekken en vuil van oppervlakken. Draagbaar zandstraalapparaat met zwaartekrachttoevoer en een druk van 90 psi.

Product name: Pneumatic sandblasting machine Pot capacity: 21LBS (1KG) Gas consumption: 7.0cfm, 1981/min Spraying mesh: 30-120 mesh Air inlet connector: 1/4” Product weight: 445g Working air pressure: 90PSl Product packaging: carton packaging Common spraying materials: copper ore sand, quartz sand, corundum, iron sand, Hainan sand, etc. 1. Do not use your hands to test the power of sandblasting during work to avoid hurting your hands. It is best to take safety protection when working (such as wearing the first picture/protective glasses/mask, etc.) 2. Pneumatic sandblasting guns have a wide range of uses: such as descaling, residue, rust removal, refurbishment of old parts, cleaning of impurities in dead corners, atomization, paint marks, cargo wear marks, etc. Abrasive Blasting: It uses compressed gas to spray the spray material (common spray materials are copper ore sand, quartz sand, emery sand, iron sand, Hainan sand, etc.) onto the surface of the workpiece. Under the effect of impact and cutting, the surface can get a certain degree of cleanliness (such as rust removal), at the same time, it also improves the fatigue resistance of the workpiece; sandblasting will make the surface form a certain roughness, which increases its The adhesion between the coatings prolongs the durability of the coating film, and is also conducive to the smoothing and decoration of the coating.