Universele noodreparatieset voor lekke banden, professioneel en robuust gereedschap voor motorfietsen en autoaccessoires.

How To Ues: Step 1: Use the included heavy-duty pliers to remove the object from the tire. Step 2: Apply lubricant on the T-handle spiral probe before use to enlarge the puncture area. Step 3: Use the attached pliers to tear off the rope and insert it. Step 4: Insert the strip into the tire and rotate it 360 degrees. Leave the strip 12 mm outside, and then pull out the needle. Step 5: Use a knife to align the excess rope with the tire tread. Step 6: Finally, re-inflate the tire to the recommended pressure. Notes：1. Please allow 2-3% error due to manual measurement. Please make sure you do not mind before you bid. 2. The colors may have different as the difference display, please understand.