JOYOR C10 (P) elektrische scooter, 500W motor, verwijderbare 48V 10,4Ah accu, 10 inch banden, maximale snelheid 40 km/u, maximale actieradius 30-40 km

48V 10.4Ah Battery, Extra Long Endurance JOYOR C10 has sufficient 48V 10.4Ah battery to provide constant power support for riding, 30-40km range allows you to easily manage outdoor riding, through any rugged mountain roads, without worrying about power problems. 500W motor, full of power The JOYOR C10 is equipped with a powerful 500W motor capable of travelling at speeds of up to 25m/h (After releasing the speed limit:40km/h). Dual shock absorbers ensure smoothness and reliability In order to provide a more comfortable riding experience, JOYOR C10 adopts both front and rear shock absorbers, which can effectively suppress the bumps generated when riding, so that you can complete every movement in a more comfortable state and reduce the fatigue caused by riding. 10-inch pneumatic tyres for a comfortable ride The 10-inch pneumatic tyres have a non-slip tread pattern for a safer ride and can easily pass through obstacles for a more comfortable ride. Folding Design JOYOR C10 electric scooter adopts folding design, the weight of 19.5kg is convenient for you to carry around, and it can be put into the boot or put in the corner of the office. Specification: Brand: JOYOR Type: Electric Scooter Model: C10 Battery capacity: 48V 10.4AH Range: 30-40km Maximum speed: 25km/h Controller current: 23A Motor power: 500W Frame material: Magnesium alloy Braking system: Front and Rear disc brake Shock absorption system: Front and rear shock absorption Tires: 10-inch pneumatic tires Climbing angle: 25° Maximum load: 120KG Product Weight: 19.5kg Package Weight: 23kg Product Size: 1190*590*1300mm Package Size: 1200*220*585mm Package Contents 1 x JOYOR C10 Electric Scooter 1 x Charger 1 x User Manual EU Countries Can be delivered within 4-7 Days.You don't have to pay delivery fee. Common problems and solutions for scooters Q: The meter cannot be turned on A: First check if the line on the back of the meter is plugged in tightly, and re-plug it; if the meter still cannot be turned on after the operation, send a replacement to the customer Instrument/Check if the instrument fuse is burnt out/Check if the instrument or switch plug pin is broken Q: Motor does not work A: If it is a dual motor, swap the front and rear controllers to see if the non-working motor will work normally; Q: Abnormal noise from the motor A: Check if there is an error code on the screen, and provide a video for the technician to determine if the abnormal noise is normal Q: Headlight flickers or does not work A: Check if the line is loose, and re-plug the interface; the step-down board of the light strip may be burned/check if the light switch is available, if not, replace the switch Q: Steering/taillight does not work A: Re-plug the line, if it does not work, re-issue the accessories Q: Brake failure A: Check if the instrument has an error prompt, if so, the brake power-off switch may be faulty, and the power-off switch needs to be replaced; or check if the brake pads are worn out and the brake line is loose Q: Error code appears on the instrument A: Check the corresponding manual to see what kind of fault the error code belongs to, and operate according to the instructions. If it still does not work, provide error code pictures/videos. Q: The charger does not work A: First check whether the charger is green or red-to-green when charging; if the green light is always on, it may be a problem with the charger/charging port/battery, and if the red-to-green light is normal, it may be a problem with the instrument.