Origineel formaat, nieuw 2,45 inch IPS LCD-scherm met hoge helderheid voor Nintendo Gameboy Color GBC LCD. Het is niet nodig om de behuizing te bewerken.

This is a LCD screen, not a console! If you don't have a motherboard, you can't assemble it into a console. Glass lens with logo Please be careful when connecting the flat cable. If the flat cable is inserted reversely, it will certainly burn out the console fuse!!! Fuse purchase link https://www.aliexpress.com/item/1005003481679989.html?spm=5261.ProductManageOnline.0.0.38d34edfBGQumx Use a ribbon cable with wires to connect to the battery holder. It can significantly reduce power consumption and the speaker will not produce noise. The black lens is actually dark gray. Close to the original Nintendo color. Because we used to call it black. And the color is very close to black. There is color difference in taking photos. It looks like black. Please carefully read the following precautions and installation methods before installation. The installation steps are really very simple. All you have to ask are below. Install self provided tools: Y-shaped 3.0 screwdriver, cross 3.0 screwdriver. The LCD screen was carefully tested before delivery. Before installation, please turn on the GBC motherboard as follows to check whether it is normal. Product features: 1. 2.45 inch TFT LCD. Original size. Easy installation. 2. Support point-to-point display. Support black and white style display. High brightness display. Long press the touch sensing cable for 3 seconds to switch the display style. Briefly press to adjust the brightness. 3. Low power consumption, with millet 1800 Ma rechargeable battery, the highest brightness of the screen, edgb burning card, and normal game time of about 5 hours 4. Support brightness adjustment memory and display style memory, and there is no need to reset when starting up. Installation tutorial: Touch the cable. The side that must be covered with film is in contact with the shell. Gold faces inward. Otherwise, there may be accidental touches. Use a ribbon cable with wires to connect to the battery holder. It can significantly reduce power consumption and the speaker will not produce noise.