
Volledig zicht
Gelijkwaardige producten
Elektrische nagelfreesmachine met 35000/20000 toeren per minuut voor manicure, nageltips, elektrische manicure en pedicurevijl
€49.90€77.71
kleur : Komt overeen met de afbeelding

maat : ons
EU
ons
Hoeveelheid :
Rapport
Inclusief inbreuk op het auteursrechtGratis standaard verzending. Zie de details
Geschat tussen Sat, Jul 18 en Wed, Jul 22
U kunt het product binnen 30 dagen na ontvangst retourneren. Zie de details
Winkel met vertrouwen
Geld-terug-garantie
Ontvang het bestelde artikel of krijg uw geld terug. Meer informatie
Over dit item
Afkomstig van Little sunny
De verkoper aanvaardt alle verantwoordelijkheid voor deze aanbieding.Item nummer: 37381437
Artikelspecificaties
Capaciteit
1
Typ
Nagelkunstapparatuur, manicureboren
Textuur
Gel
Itembeschrijving van de verkoper
Power : 20W
No-Load Speed : 30000rpm
Output voltage : 12V
Size : 23cm*20cm*9.5cm
Material : Plastic
Model Number : 202A Electric Nail Drill
Number of Pieces : One Unit
Item Type : Electric Manicure Drill & Accessory
35000/20000 RPM Electric Nail Drill Machine Mill Cutter Sets for Manicure Nail Tips Manicure Electric Nail Pedicure File
Feature:To ensure smooth operation and safe performance, please read the manual carefully before use:1. Installation and wire connection1.1 Connect the 5-pin plug of the portable grinding head/hand piece to the OUPUT socket at the main panel.1.2 Connect the pedal switch to the FOOT S/W socket.1.3 Select the proper drill bit accordìng to actual requirements, and fasten it to the handpiece.1.4 Turn the speed control knob to the left (MIN).1.5 Connect with the main source power.2. Operation2.1 Press the function switch to HAND for manual control, the indicator will be on and the grinding head starts to moving slowly.2.2 Turmn the SPEED CONTROL to the right to accelerate the speed.2.3 When the function switch is pressed to FOOT, step on the pedal and the machine starts to work. (foot switch is optional).2.4 The turning directions can be swapped: FWD means clockwise direction and REV means counterclockwise direction.2.5 Adjust the speed of the grinding head within a reasonable range.2.6 Please adjust the handpiece to the lowest speed before changing forward/backward direction.3. Instructions3.2 Turn the SPEED CONTROL counterclockwise to decelerate the grinding head to the minimum before turning off and switch the main power source to 0.3.3 After operation, put the grinding head on the top of the main panel.3.4 While the grinding head is in operation, never pull out the 5-pin plug of the portable grinding head.3.5 For long idle time, please disconnect the source power.Specification:Main (power supply & control) partRated voltage range: 100~120V/60 Hz, 220~240V/50 HzRated power input:18W or 32WOutput rated voltage: DC0-13V or 18VHandpiece (motor) partWorking voltage:DC0-13V or 18VRated current:1.5A or 1.8ARated speed: 0-20000RPM or 30000RPMPackage Included:1x Main Machine;1x Handpiece;1x Foot W witch1x Handpiece Support6x Drill Bits1x User Manua(English)










