Elektrische fiets Ridstar MN26 26’’, zwart Ridstar MN26 1500W Fat Tire Mountain Ebike 48V20AH

【Superb Motor Power and Long Range】- The MN-26 ebike boasts a 1500W motor for effortlessly conquering 30-40 degree slopes, can reach a top speed of 36mph. It comes with a removable 48V 20Ah battery (with UL& BMS system) that provides an impressive range of up to 60-70 miles on a single charge. The waterproof and removable battery design allows for convenient installation and minimizes the risk of theft. 【Ingenious Design】- The MN-26 features a robust carbon steel frame with adjustable seat and handlebars, a step-through frame, a large capacity basket, rear rack, and bottle mounts. This bike is perfect for your daily activities, whether it's commuting, mountain biking, or leisurely rides. 【Ultimate Comfort & Enhanced Safety】- The upgraded 26x4'' wide puncture-resistant fat tires provide superior performance and a sleek look. Experience a smooth ride with an adjustable front suspension and seatpost. Stay in control with dual disc brakes and enjoy precise shifting with the Shimano 7-gear system. Stay safe with a bell, bright LED headlight, and brake light, even during nighttime rides. 【3 Modes for Versatile Riding】- The MN-26 features three modes: pure electric, assisted bicycle, and normal bike. Opt for assisted mode for long-distance travel with exercise. Customize your ride with five-speed settings. The LCD color display provides important ride information like speed, battery level, and mileage. Stay connected with the built-in USB port for phone charging on the go, anytime, anywhere. 【Gear Up and Enjoy More Storage Space】- The MN-26 bike comes with additional pre-assembled features. The bottle mounts, front basket, and rear rack have already been installed, allowing you to easily add accessories to your bike. Whatever the situation, the MN-26 e-bike is your ultimate choice. Specifications: Model: MN-26 Color: Matt Black Frame Material: 26"6061 Aluminum Alloy Shock Absorber: suspension front fork and seat post Battery: 48V20ah Lithium Battery Motor: 48V 1500WHigh speed brushless motor Transmission: Shimano 7-Speed gears Display: LCD crystal screen Riding Mode: Pure Electric, Power Assist, Bike Mode Brake info: front & rear Mechanical Disc Brakes Seat post:Suspension seat post Tire: 26inch 4.0 fat tires Rim 26inch Aluminum alloy single deck spoke rim Fender Material: PVC Fender Quantity: Front*1 Rear*1 Package size: (160*28*83CM) GW:45KGS Net weight: 37KG Max Load: 150KG Recommended Height:170-190CM Max Speed: 55km/h Mileage: 70-90km Charging Time: 5-7 hour full charge USB: 5V usb charge Battery removable: Yes Light position: front fork and rear luagger Front Rack: Yes Rear Rack: Yes Controller information: sine wave controller Voltage: 48V Current: 28A Charger information: 54.6V/2A Current: 2A EU/UK Countries Can be delivered within 4-7 Days.You don't have to pay delivery fee. All bikes 90% have been installed, one year warranty on the frame, six months warranty on the battery, controller, instrumentation, etc. If you encounter any problems when you receive the product, please contact our professional after-sales customer service first. Italy After Sale Point: Weimiao ji Via Ramiro ortz 6/3 65126 pescara IT 3778179737 Before you go to the repair store ,please contact us first. Email: lijuping@gunai.store Whatsapp: +86 17841010701 Common bicycle problems and solutions Q: Error code appears on the meter A: Check the manual to see what kind of fault the error code belongs to, follow the instructions to handle it, and if it still doesn't work, provide error code pictures/videos. Q: Charger doesn't work A: First check whether the charger is green or red to green when charging; if the green light is always on, it may be a problem with the charger/charging port/battery, and if the red to green light indicates that the charger is normal, it may be a meter problem. Q: The meter can't be turned on A: Check whether the meter line/controller line is plugged in tightly, and re-plug it; if it doesn't work, it may be a problem with the meter/main line/controller Q: Pedal assist doesn't work A: Check whether the meter parameters are correct, confirm whether the throttle can work, and whether the sensor line is damaged or loose; if all are correct, replace the sensor Q: Rear wheel shakes A: Check whether the spokes are loose and whether they are installed in place; you can tighten the spokes and reinstall the rear wheel. Q: Motor does not work/has strong noise A: Check if the controller is loose, re-plug the motor cable of the rear wheel; provide a video of the noise for the technician to determine what the sound is. Q: Battery does not work/battery life is insufficient A: Measure the battery voltage after fully charging the battery (provide pictures). If the voltage is abnormal, there may be a problem with the battery/battery cover/circuit board. For battery life issues, customers test the battery life under full charge and provide the VOL when fully charged, the ODO (total mileage) when fully charged, the VOL when the battery is exhausted, and the ODO (total mileage) when the battery is exhausted. Q: Pedals cannot be installed A: Check if the left and right pedals are installed/twisted in reverse order. If so, check if the crank/pedal threads are slipped. If slipped, the crank pedals need to be replaced. Q: Brakes don’t work/are not sensitive/leak oil A: Adjust the brakes first/check if the brake pads are worn, if there is oil on the brake pads or discs, insufficient friction/is the brake line loose/leak oil, then you need to replace the brakes directly Q: There is an abnormal sound from the brakes A: It may be the sound of wiping the disc. Ask the customer to check if the disc is deformed. If it is not deformed, adjusting it can solve the problem. The disc is stuck in the middle of the brake (with a gap), not too close to the left or right side of the brake Q: The riser is loose and has a gap A: Check if the headset is aligned and installed, and adjust the headset; if it doesn’t work, replace a headset Common problems and solutions for scooters Q: The meter cannot be turned on A: First check if the line on the back of the meter is plugged in tightly, and re-plug it; if the meter still cannot be turned on after the operation, send a replacement to the customer Instrument/Check if the instrument fuse is burnt out/Check if the instrument or switch plug pin is broken Q: Motor does not work A: If it is a dual motor, swap the front and rear controllers to see if the non-working motor will work normally; Q: Abnormal noise from the motor A: Check if there is an error code on the screen, and provide a video for the technician to determine if the abnormal noise is normal Q: Headlight flickers or does not work A: Check if the line is loose, and re-plug the interface; the step-down board of the light strip may be burned/check if the light switch is available, if not, replace the switch Q: Steering/taillight does not work A: Re-plug the line, if it does not work, re-issue the accessories Q: Brake failure A: Check if the instrument has an error prompt, if so, the brake power-off switch may be faulty, and the power-off switch needs to be replaced; or check if the brake pads are worn out and the brake line is loose Q: Error code appears on the instrument A: Check the corresponding manual to see what kind of fault the error code belongs to, and operate according to the instructions. If it still does not work, provide error code pictures/videos. Q: The charger does not work A: First check whether the charger is green or red-to-green when charging; if the green light is always on, it may be a problem with the charger/charging port/battery, and if the red-to-green light is normal, it may be a problem with the instrument.