7x18 Monoculaire Telescoop Elektronische Afstandsmeter Golf Afstandsmeter

Real product photography, any unauthorized use will be prosecuted! Product Description: Magnification factor: 7 Objective lens diameter: 18mm Eyepiece diameter: 12mm Measuring distance: 50-920 yards Measurement accuracy: +/- 2 yards Resolution: 13 Test distance: 1000 yards, one yard = 0.914m Viewing Angle: 7.8 Power supply: Use two CR2032 button batteries Size dimensions: 945038mm Weight: 0.1 Kgs Function: This product has two functions: GREEN MODE Function Lawn Function This function is specially designed for golf enthusiasts, allowing you to easily obtain the distance from you to the golf hole. GENERAL MODE general function Component Name Power switch/function adjustment button Function Key Battery Compartment Object Observation System How to use Press the switch to activate the instrument, and it will directly enter the lawn function. 1 Used when playing golf: No data input is required, the startup screen is the golf distance measurement function. 2. The height of the target flagpole in yards/meters.The code 6 has been entered before leaving the factory. Align the bottom line GREEN of the screen with the horizontal line of the lawn, which means aligning with the base of the golf flagpole. Press the switch to adjust the position of the scan line up or down until it reaches the top of the flagpole. Numbers will appear on the screen, showing the distance between your holes. Used to measure the distance to special targets 1、 When pressing the function/adjustment key, it enters the general function state, and the screen will flash with three slot values and one decimal place. If you want to measure the distance between you and the target, please input the height of the target object. Press the switch/adjustment button to enter hundreds of digits, ranging from 0 to 9 Press the function key to enter ten digits, then press switch/adjust to input the value; the range is also from 0 to 9 Set the single digits and the digits after the decimal point according to the above steps Press the function key to end the above input process. Based on the height you input, the screen will display the small distance you can measure Align the bottom line of the screen display with the bottom line of the target object Press the switch to adjust the position of the scan line up or down to the top of the flagpole Numbers will appear on the screen, showing the distance between you and the target Precautions The displayed distance is consistent with the unit of measurement for the height you input. If the input value is in meters, the displayed distance will also be in meters.If the input value is in yards, the displayed distance will also be in yards. After 60 seconds of operation, the power will automatically shut off. Features This is a new product that differs from laser distance meters. It is a digital instrument that uses optical and digital technology to measure distance. It is also a very accurate distance testing device that does not emit any form of energy radiation and does not cause any damage or destruction during distance measurement activities.