3.0 USB Plus Zbdongle-E Sonoff Dongle E Zigbee Gateway USB-interface Capture EFR32MG21 Spraakbesturing

SONOFF Zigbee 3.0 USB Dongle E is a universal Zigbee USB stick. It can be used as a universal Zigbee gateway in Home Assistant or other open-source platforms via ZHA or Zigbee2MQTT to locally control all your Zigbee sub-devices, so you don't need to invest in the Zigbee hubs for different brands, all you need is a universal gateway - Dongle Plus! The dongle plus has a wide range of supported devices, such as Ewelink BASICZBR3, Ewelink S31 Lite zb, Ewelink SNZB01, Ewelink SNZB02, Ewelink SNZB03, Ewelink SNZB04, Ewelink ZBMINI, Ewelink S26R2ZB , and various sub-devices from various brands or flash router firmware to extend the network range. Wide Range of Supported Devices Dongle can be used as a Zigbee 3.0 gateway in open-source automation platforms to manage various sub-devices from various brands or flash router firmware to extend the network range. * The official firmware supports 21 direct children by default and up to 40 children. You can modify the relevant configuration to support up to 100 children. NOTE:The serial usb chip is not CP21x as it says on the Zigbee2MQTT homepage, but CH9102F. Going to try different drivers. When changing the serial driver from CP21x to CH9102F, everything works fine. The ZBDongle-E supports the Green Power devices, If you want to add the Hue Zigbee Green Power device, you need to switch the channel of ZBDongle-E to 11/15/20/25 at your specific application. Product Features: Pre-flashed with Z-Stack 3.x.0 coordinator firmware Can use ZHA in Home Assistant or use Zigbee2MQTT Base on TI EZSP 20dBm output gain SMA interface external antenna Aluminum housing effectively reduces signal interference from peripherals Optional 1.5m USB extension cable for better signal range Package includes : 1 * Zigbee 3.0 USB Dongle E 1 * Antenna 1 * User Manual